Walker S1

Key figures as stated by the manufacturer

0 of 6 stated · 6 gaps

The manufacturer states none of the 6 key figures.

How to read the figures

14kgA30.9lbA: The letter in the grey square after a figure points to the source the figure came from. Robots with several sources carry several letters.
Payload, walking: A stroke before a field name means the figure carries a caveat that affects how it compares with other robots. The caveat is printed with the figure.
74.5lb: Imperial figures are our own conversion unless the manufacturer states an imperial figure itself. The source letter always belongs to the metric figure — a conversion has no source of its own.

Manufacturer's own photo.

The manufacturer’s words

A New Milestone for Industrial Domains

Source: ubtrobot.com · Retrieved 2026-09-28

This category is not our assessment.

2 of 33 fields stated

The letter points to the source at the foot of the page. Fields without a figure are dashed: the manufacturer does not state them — that is not the same as zero, and not the same as no.
Field	Value	Source and caveats
Physical
Weight	not stated
Length	not stated
Width	not stated
Height	not stated
Degrees of freedom	not stated
Payload, walking	not stated
Payload, standing	not stated
Max speed	not stated
Max slope	not stated
Single obstacle	not stated
Stair step, continuous	not stated
IP rating	not stated
Operating temperature, low	not stated
Operating temperature, high	not stated
Power
Battery	not stated
Runtime	not stated
Hot-swap battery	not stated
Charge time	not stated
Docking station	not stated
Sensing and autonomy
LiDAR	not stated
Cameras	One RGBD camera and a stereo RGB camera pair in the head; a further RGBD camera in the torso.	Note From the labelled component diagram under "Specifications", not a specification table. The same diagram also labels two speakers on the torso, which is not a camera. ⁠A
Onboard compute	not stated
ROS 2	not stated
SDK languages	not stated
Autonomy level	not stated
Payload and expansion
Mounting interface	not stated
Power out	not stated
Data ports	`A combined Gigabit Ethernet / USB 3.0 port`	Caveat The label is cut off at the right edge of the producer's own diagram; "USB 3.0" may continue beyond what is shown. The same diagram also labels an emergency stop button, a power switch and a fast charging port nearby, none of which are data ports. ⁠A
Commercial
Indicative price	not stated
EU
CE stated	not stated	Records only what the manufacturer states regarding CE marking.
FCC stated	not stated
UL stated	not stated
CCC stated	not stated

The producer's own "Specifications" section for Walker S1 is a single labelled diagram (front and back view) naming component locations - cameras, a speaker, an emergency stop button, ports, a power switch, a charging port, an IMU and force sensors - rather than a specification table.
Walker S1 is described as an industrial humanoid, "introduced into vehicle manufacturing assembly lines to assist in car production, working collaboratively with autonomous logistics vehicles and AMRs/AGVs through smart manufacturing management systems."
No weight, height, degrees-of-freedom, payload, speed or battery figure appears anywhere on the producer's own page; the diagram's own numbers are component counts (for example two RGBD cameras, two six-axis force sensors), not performance specifications.
Eye Shenzhen reported on 15 October 2024 that UBTECH's recently launched industrial humanoid Walker S1 was starting task training at a BYD factory.

The manufacturer’s original product page for this model.

https://www.ubtrobot.com/en/humanoid/products/walker-s1

A Manufacturer product page. www.ubtrobot.com/en/humanoid/products/walker-s1 · Retrieved 2026-09-28

One line per source, not per figure: a source has one retrieval date. The letter beside a figure points to the line it came from.