Key figures as stated by the manufacturer
3 of 6 stated · 3 gaps- Weight A 38kg83.8lbOur conversion from 38 kg. The manufacturer does not state an imperial figure itself, so the conversion has no source of its own.
- Payload, walking not stated
- Runtime A more than 120minWarning: load condition not stated
- Max speed A 12.6km/h7.83mphOur conversion from 12.6 km/h. The manufacturer does not state an imperial figure itself, so the conversion has no source of its own.
- AI model not stated
- Indicative price not stated
How to read the figures
- 14kgA30.9lbA
- The letter in the grey square after a figure points to the source the figure came from. Robots with several sources carry several letters.
- Payload, walking
- A stroke before a field name means the figure carries a caveat that affects how it compares with other robots. The caveat is printed with the figure.
- 74.5lb
- Imperial figures are our own conversion unless the manufacturer states an imperial figure itself. The source letter always belongs to the metric figure — a conversion has no source of its own.
Deviations and variants in the key figures (3)
Weight
Note From the headline figures on the N1 page.
Runtime
Caveat The page says "over 2 hours of continuous runtime per charge" and gives no load or task condition.
Max speed
Note From the headline figures, labelled "Max. Speed".
Product image from a reseller's page (robotopian.com), not the manufacturer's own site; taken from the curated list of Chinese humanoid cutouts.
Intended use, per the manufacturer
The manufacturer’s words
As the first open-source humanoid robot, developed by Fourier, N1 is purpose-built for cutting-edge embodied Al research.
Source: fftai.com · Retrieved
This category is not our assessment.
Full specifications
7 of 33 fields stated| Field | Value | Source and caveats |
|---|---|---|
| Physical | ||
| Weight | 38kg83.8lbOur conversion from 38 kg. The manufacturer does not state an imperial figure itself, so the conversion has no source of its own. | Note From the headline figures on the N1 page. A |
| Length | not stated | |
| Width | not stated | |
| Height | 130cm51.2inOur conversion from 130 cm. The manufacturer does not state an imperial figure itself, so the conversion has no source of its own. | Note From the headline figures on the N1 page. A |
| Degrees of freedom | 23DoF | Note From the headline figures on the N1 page; no split by limb is given there. A |
| Payload, walking | not stated | |
| Payload, standing | not stated | |
| Max speed | 12.6km/h7.83mphOur conversion from 12.6 km/h. The manufacturer does not state an imperial figure itself, so the conversion has no source of its own. | Note From the headline figures, labelled "Max. Speed". A |
| Max slope | 15–20° | Note The page says N1 "can handle 15-20° slopes". A |
| Single obstacle | not stated | |
| Stair step, continuous | 20cm7.87inOur conversion from 20 cm. The manufacturer does not state an imperial figure itself, so the conversion has no source of its own. | Note The page says N1 can "climb 20cm stairs" and gives no number of steps. A |
| IP rating | not stated | |
| Operating temperature, low | not stated | |
| Operating temperature, high | not stated | |
| Power | ||
| Battery | not stated | |
| Runtime | more than 120minWarning: load condition not stated | Caveat The page says "over 2 hours of continuous runtime per charge" and gives no load or task condition. A |
| Hot-swap battery | not stated | |
| Charge time | not stated | |
| Docking station | not stated | |
| Sensing and autonomy | ||
| LiDAR | not stated | |
| Cameras | not stated | |
| Onboard compute | not stated | |
| ROS 2 | not stated | |
| SDK languages | not stated | |
| Autonomy level | not stated | |
| Payload and expansion | ||
| Mounting interface | not stated | |
| Power out | not stated | |
| Data ports | not stated | |
| Commercial | ||
| Indicative price | not stated | |
| EU | ||
| CE stated | not stated | Records only what the manufacturer states regarding CE marking. |
| FCC stated | not stated | |
| UL stated | not stated | |
| CCC stated | not stated | |
Notes
- Fourier presents N1 as its first open-source humanoid robot: a hardware resource package with design schematics, BOM, assembly manuals and basic operating software code is offered for download.
- Fourier also names single-leg balancing and ground push-ups among the movements N1 can perform.
- Yicai Global reported on 14 April 2025 that Fourier had debuted its first open-source humanoid robot, the N1.
The manufacturer’s own page
The manufacturer’s original product page for this model.
Open the manufacturer’s page for N1https://www.fftai.com/ecosystem/n1
Sources
-
A
Manufacturer product page. www.
fftai. · Retrievedcom/ ecosystem/ n1
One line per source, not per figure: a source has one retrieval date. The letter beside a figure points to the line it came from.